GASKET MAKER RTV
High Performance acetoxy silicone gasket maker which retains its flexibility in temperatures up to 300C.
- Product Code: PMS-360
- Gross Weight: 380gr
- Volume: 310ml
- Shelf Life: 15 months
- Colors: Red,Black, Grey,White
SPECIFICATIONS
- Resists shrinking and cracking caused by exposure to thermal cycling between -50C ve 300 C
- Preserves its elasticity when permanently exposed to temperatures up to 250C.
- Replaces almost any cut gasket by making reliable “formed-in-place” gaskets.
- Can be applied on pre-cut gaskets to improve reliability
- Resistant to most chemicals, oils and solvents
- Pure silicone, does not contain any organic extender.
APLICATION AREAS
- Forming gaskets on engine parts, automobiles, machines, heating systems, industrial owens, chimneys
- In sealing and joining applications where high-temperature resistance is desired
TECHNICAL INFO
- Curing: Single component acetoxy
- Density: 1,05 gr/lt
- Tack-free time: 10 minutes
- Curing rate: 3-4 mm/day
- Extrusion Rate : 150 gr/minute
- Shore A Hardness: 27
- Elongation at Break: 320%
- Movement capability: 10%
- Operating Temperature: Between -40°C and +250°C
- Application Surface Temperature: Between +5°C and +40°C
APPLICATION METHODS
- Make sure application surfaces are clean and dry and free from dirt, grease or loose particles.
- A primer should be applied on very porous surfaces such as natural stone or marble, or else it may stain.
- Metal surfaces should be cleaned with a proper solvent prior to the application.
- Since it cannot be painted over, it should not be applied to surfaces which will be painted later.
- If possible, a masking tape should be used around application areas.